• 欢迎访问赵煮机网,有问题可留言或电报

如何挂PT和BT: Ubuntu安装qBittorrent webui (qbittorrent-nox)

折腾笔记 赵煮机 1年前 (2018-07-07) 3687次浏览 0个评论
文章目录[隐藏]

添加源

sudo add-apt-repository ppa:qbittorrent-team/qbittorrent-stable

安装

成功添加源后,更新包的信息,再安装 qBittorrent webui:

sudo apt-get update
sudo apt-get install qbittorrent-nox

启动

成功安装后,输入以下命令启动软件:

qbittorrent-nox

启动后,在浏览器中输入http://ip 地址:8080,即可打开 qBittorrent 的网页端。默认的用户名是admin,默认密码为adminadmin。如果要使用其他端口,只需在启动命令中加入--webui-port=XXXX参数,其中XXXX为端口号:

qbittorrent-nox --webui-port=XXXX

设置开机自启动

输入vi /etc/init.d/qbittorrent-nox-daemon,添加以下内容:

#! /bin/sh
### BEGIN INIT INFO
# Provides:          qbittorrent-nox
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Starts QBittorrent
# Description:       Start qbittorrent-nox on start. Change USER= before running
### END INIT INFO

# Author: Jesper Smith
#

# Do NOT "set -e"

# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="QBittorrent"
NAME=qbittorrent-nox
DAEMON=/usr/bin/$NAME
DAEMON_ARGS=""
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/qbittorrent
USER=[USERNAME]

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions

#
# Function that starts the daemon/service
#
do_start()
{
    # Return
    #   0 if daemon has been started
    #   1 if daemon was already running
    #   2 if daemon could not be started
    start-stop-daemon -c $USER -b -t --start --quiet  --exec $DAEMON  \
                || return 1

    start-stop-daemon -c $USER -b --start --quiet --exec $DAEMON -- \
        $DAEMON_ARGS \
        || return 2
    sleep 1
}

#
# Function that stops the daemon/service
#
do_stop()
{
    start-stop-daemon -c $USER --quiet  --stop --exec $DAEMON
    sleep 2
    return "$?"
}


case "$1" in
  start)
    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
    do_start
    case "$?" in
        0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
        2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    esac
    ;;
  stop)
    [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
    do_stop
    case "$?" in
        0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
        2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    esac
    ;;
  status)
       status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
       ;;
  restart|force-reload)
    log_daemon_msg "Restarting $DESC" "$NAME"
    do_stop
    case "$?" in
      0|1)
        do_start
        case "$?" in
            0) log_end_msg 0 ;;
            1) log_end_msg 1 ;; # Old process is still running
            *) log_end_msg 1 ;; # Failed to start
        esac
        ;;
      *)
        # Failed to stop
        log_end_msg 1
        ;;
    esac
    ;;
  *)
    #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
    echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
    exit 3
    ;;
esac

其中,要把USER=MyUserNameMyUserName改为用户名,在DAEMON_ARGS="--webui-port=XXXX"中把XXXX改为开启的端口号。保存并退出,修改文件的权限:

sudo chmod 755 /etc/init.d/qbittorrent-nox-daemon

再执行以下命令:

sudo update-rc.d qbittorrent-nox-daemon defaults

下一次开机时会自动启动 qbittorent。如果要手动开启、停止和重启,参考以下命令:

sudo service qbittorrent-nox-daemon start
sudo service qbittorrent-nox-daemon stop
sudo service qbittorrent-nox-daemon restart

配置

QBittorrent webui 的配置文件qBittorrent.conf~/.config/qBittorrent/文件夹中。

更多参考

本文主要参考了How to install qBittorrent with webui on Ubuntu,如果需要配置 HTTPS 可参考原文。

如果要在 CentOS 中安装,可参考Senra 的教程


版权声明: 如未注明转载 , 均为本站原创文章
本网站采用BY-NC-SA协议进行授权
转载前请联系,并注明原文链接:如何挂 PT 和 BT: Ubuntu 安装 qBittorrent webui (qbittorrent-nox)
喜欢 (0)
发表我的评论
取消评论

表情 贴图 加粗 删除线 居中 斜体

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址